6.Maintenance hi-lift platform truck

Purpose: This truck is mainly used for maintenance work of the aircraft engine, wing and fuselage.
Feature: This truck is equipped with flat platform mounted on the scissor’s mechanism with hydraulic sub-platforms. Optional  generator unit ,air compressor unit , cleaning unit, and elevator or stair to the raised platform are available. Various type of these trucks and equipments are also available to meet your requirement.
HSW-904 (Platform floor heights from 3 up to 9 m) is mainly used for maintenance of the center engine of MD-11 aircraft and has a V-shape cutout at the front part of forward extendable platform.
HSW-703C (Equipped with hydraulic lifter for raised platform and lateral extending sub-platforms on each sides of the platform, platform floor heights from 1.14 up to 7 m, and max payload capacity: 1,000 kg)
HSW-902AS (Platform floor heights from 2.15 up to 9 m) is used for washing the aircraft and is equipped with a tank for washing detergent and washing pump. The platform can be moved to both front and rear side by 2.5m stroke each for the efficient operation.

TL-521DM (Hi-lift truck for door maintenance work, max. floor height: 5.2m, max. payload capacity: 2,500 kg) is equipped with the forward extending body by 2.5m stroke, stabilizing jacks ,hoist for the door, stair for the raised platform.
  HSW-904
     Usable for the maintenance of the center engine of MD-11, Max. height 9m

                 

  HSW-902AS
                  Usable for washing aircraft fuselage,
      Platform with front and rear 3.2m movement, max. platform height 9m

                 


  HSW-901S
                  Usable for washing aircraft fuselage.
      Platform with front and rear 3.2m movement, max. platform height 9m.

                


  HSW-803U
                Usable for the maintenace of vertical fin,
              max. platform height 8m, equipped with elevater

               

  HSW-800-2
       Max. platform height 8m. Equipped with rear sliding sub platform.

                   

  HSW-751AS
        Usable for washing aircraft fuselage, max. platform ehight 7.5m.
               Platform with front and rear 2.5m movement.

                


  HST-75B              Max. platform height 7.5m
                   

  HSW-703C Max. platform height 7m, equipped with elevator.
               

  HSW-700-2 Max. platform height 7m, platform with rear 1.0m movement
               

  HSW-602V     Usable for the maintenace of engine tail-cone,
                    max. plat form height 6.0m
               

  HSW-470SV       Usable for the maintenance of tail-cone,
                    max. platform height 4.7m
               

  HS-403C     Max. platform height 4.0m, equipped with elevator.
                 

  TL-521DM
                 Usable for the maintenace of the door,
        Max. platform height 5.2m van body with 2.5m front movement

                 

Previous

Products

Next